- Concrete Inserts - P3246 - Cross Insert

P3246


View the P3246 Product Sell Sheet.


Size Range: 3/4" through 1 1/2"

Approvals: Complies with Federal Specification A-A-1192A (Type 18), WW-H-171-E (Type 18), ANSI/MSS SP-69 and MSS SP-58 (Type 18).

Installation:
  • 1. Nail insert to wooden forms.

  • 2. Locate fiberglass bars to rest upon existing reinforcing rods or wire the insert directly into existing reinforced rods to achieve the specified load ratings.

Features:
  • Stainless steel body prevents corrosion.

  • Cone shaped body.

  • Exceptional pullout strength.

  • Eliminates uncertainty of tying conventional inserts into bridge deck rebars.

Part Number Threaded
Hole
Size(A)
Max Allowable Vertical Load (lbs) Max Allowable Shear Loadb (lbs) Max Allowable 45° Pull Load (lbs)
P3246-75 ST 3/4" - 10 3,230a 1,930 2,740
P3246-87 ST 7/8" - 9 4,480a 2,680 3,800
P3246-1 ST 1" - 8 5,700 3,540 5,000
P3246-125 ST 1-1/4" - 7 5,700 5,700 6,000
P3246-150 ST 1-1/2" - 6 5,700 8,280 6,000
Note:
Safety factor of 5 in 3,000 psi concrete
aLimited by Threaded Rod Safe Load in accordance with MSS-SP-58
blimited by MSS-SP-58 Tension Safe Load multiplied by 0.6