- a_series - A1001C - 1-1/4" x 2-1/2", 14 Gage Channel, Combination


A1001C
Channel Selection Chart
Related Channel Nuts
Additional Specifications

Part No. Finish Length Weight
A1001C
GR
10
207.00
A1001C
GR
20
207.00
A1001C
PG
10
207.00
A1001C
PG
20
207.00
A1001C
HG
10
220.50
A1001C
HG
20
220.50
A1001C
PL
10
207.00
A1001C
PL
20
207.00
Elements of Section - A1001C
Area of
Section
0.609 in2 (3.9 cm2)
 
Axis 1-1
Axis 2-2
Moment of
Inertia (I)
0.347 in4 (14.4 cm4)
0.140 in4 (5.8 cm4)
Section
Modulus (S)
0.269 in3 (4.4 cm3)
0.210 in3 (3.4 cm3)
Radius of
Gyration (r)
0.746 in (1.9 cm )
0.479 in (1.2 cm )
Column Loading - A1001C
Please contact factory for loading information
Beam Loading - A1001C
Please contact factory for loading information

Notes:

  1. Above loads include the weight of the member.
    This weight must be deducted to arrive at the net allowable load the beam will support.

  2. Long span beams should be supported so as to prevent rotation and twist.

  3. Allowable uniformly distributed loads are listed for various simple spans, that is, a beam on two supports. If load is concentrated at the center of the span, multiply load from the table by 0.5 and corresponding deflection by 0.8.

  4. The lateral bracing factor should be multiplied by the load to determine the load retained based on the distance between lateral braces.

Bearing Load on Channel:

Max Load
3,000 Lbs
1,361 Kg
Max Load
0 Lbs
0 Kg
Max Load
2,000 Lbs
907 Kg